Star Sensor Manufacturing Co., Ltd
To be a Chinese sensor begins with the heart and experience
Add to Cart
FD01Y Signal Converter Used For Torque Sensor Signal Amplification
FD01Y This signal converter is used for torque sensor signal amplification, which can improve the anti-interference, measurement accuracy and transmission distance of torque sensor.
| Base parameters | |
| Output | |
| Output signal | RS485,0~5VDC,0~10VDC,±10VDC,±5VDC,0~20mA,4~20mA,10±10mA,12±8mA |
| Supply voltage | 12～28VDC |
| Linearity | ＜0.02% |
| Output resistance | <1Ω |
| Temperature drift | ≤0.02%FS/10K (Reference temperature 23°C) |
| Nominal load | ≥10kΩ,≤400Ω |
| Power supply residual ripple | ≤100mV |
| Residual ripple at 400Ω | ≤10mV |
| Maximum current of the power loop | 30mA |
| Maximum cable transmission length | ≤1000m,≤10m,≤100m |
| Input | |
| Sensor power supply | 3.3V <20mA |
| Supply voltage temperature coefficient | <25ppm/K (Reference temperature 23°C) |
| Input signal | 0.8~2mV/V |
| Input resistance | 10⁹Ω |
| Cable length included | 2m |
| Degree of protection | IP67 (after complete electrical connection) |
| Environmental conditions | |
| Ambient temperature | 0～60℃ |
| Ambient humidity | 0%~95%RH(no condensation, no condensation) |
| Overall material | |
| Overall weight | ≈160g (with 2m cable) |
| Outer shell | 6061 aluminum |
| Plug material | Interior: PUR polyurethane Exterior: PVC (black) Female pin: Copper gold plated Sealing ring: FKM (fluoroelastomer) Lock mother: brass nickel plated |
| Cable material | PUR polyurethane (black) φ5 shielded cable 4*0.2mm |
| Mechanical stability | |
| Seismic performance | 10g(20… 2000Hz) conforms to IEC60068-2-6 standard |
| Impact resistance | 500g/ms conforms to IEC60068-2-27 standard |
| Electrical protection | |
| Short-circuit protection | perpetual |
| Anti-polarity protection | No damage, but not working |
| Insulation resistance | ≥100MΩ 500VDC |
| Dielectric strength | 500VAC |