
Add to Cart
CYYZ08Y Special Type Pressure Transmitter Constant Pressure Water Supply Heat System Range 0-0.6~2.5MPa
CYYZ08Y pressure transmitter is well designed and cost-effective. It is suitable for constant pressure water supply, heat system, heat exchange station and other sites.
Technical parameters | |
Measuring medium | Liquid or gas (compatible with contact material) |
Measuring range | 0-0.6~2.5MPa (see range selection table for details) |
Type of pressure | Gauge pressure |
Output signal | 4~20mA, RS485 (standard Modbus-RTU protocol) |
Supply voltage | 12~24VDC |
Accuracy class | 0.5%FS |
Media temperature | -40~85℃ |
On-time | 20ms |
Temperature compensation | -10~70℃ |
Stable performance | ± 0.2% FS/year |
Temperature drift | ±0.02%FS/°C (temperature compensated) |
Degree of protection | IP65 Note: The above protection level refers to the electrical connection after it is complete |
Durable performance | 10X10⁶ times (lower range to upper range cycles) |
Response frequency | Analog output≤ 100Hz, digital output≤5Hz |
Overall weight | ≈190g |
Power range | |
Current type | ≤0.02Us(W) |
Digital | ≤0.015Us(W) |
Load characteristics | |
Voltage type | ≥10kΩ |
Current type | Load ≤{(Us-7.5)÷0.02}Ω (US=Supply voltage) |
Environmental conditions | |
Ambient temperature | -40~85℃ |
Ambient humidity | 0%~95%RH(no condensation, no condensation) |
Overpressure and blasting | |
Overload pressure | 200%FS |
Burst pressure | 500%FS |
Overall material | |
diaphragm | 316L stainless steel (contact) |
Process connection | 304 stainless steel (contact) |
enclosure | 304 stainless steel (contact) |
Seals | Seen pressure and blasting charts (contact with the medium being measured) |
Hirschmann joints | ABS engineering plastics |
Mechanical stability | |
Seismic performance | 10g(20… 2000Hz) |
Impact resistance | 500g/ms conforms to IEC60068-2-27 standard |
Electrical protection | |
Short-circuit protection | perpetual |
Anti-polarity protection | No damage, but not working |
Insulation resistance | ≥100MΩ 500VDC |
Dielectric strength | 500VAC |
Output limits | |
The output is minimal | 4mA,0 |
Output maximum | 20mA ,2000 |