Star Sensor Manufacturing Co., Ltd
To be a Chinese sensor begins with the heart and experience
Add to Cart
CYYZ61AY Hygienic Pressure Transmitter Measuring Range 0~10kPa~4MPa Pharmaceutical Industry Accuracy 0.25%FS 0.5%FS
CYYZ61AY hygienic pressure transmitter is suitable for hygienic application sites, and the wetted part and diaphragm are made of 316L material and laser welding leveling process to meet the application requirements of the hygienic industry. Equipped with a variety of hygienic process connections for easy adaptation to different working conditions.
| Base parameters | |
| Measuring medium | Liquids, fluids, gases (compatible with contact materials) |
| Measuring range | 0~10kPa~4MPa(see range selection table for details) |
| Type of pressure | Gauge pressure |
| Temperature compensation | -10～70℃ |
| Accuracy class | 0.25%FS,0.5%FS |
| Response frequency | 5Hz,30Hz,100Hz |
| Stable performance | ± 0.1% FS/year |
| Temperature drift | ±0.01%FS/°C (temperature compensation range) ±0.05%FS/°C (outside temperature compensation range) |
| Overall weight | No display≈ 190g has a display ≈ 270g |
| Degree of protection | IP65 (no display) IP54 (with display) Note: The above protection level refers to the electrical connection is achieved after the electrical connection is complete |
| Output power | |
| Output signal | 4~20mA,RS485,0~10VDC,0~5VDC,1~5VDC,0.5~2.5VDC |
| Power supply range | 9～36VDC,15～36VDC,3～5VDC |
| Power range | |
| Voltage type | ≤0.02Us(W),≤0.008Us(W),≤0.001Us(W) |
| Current type | ≤0.02Us(W) |
| Digital | ≤0.02Us(W),≤0.015Us(W) |
| Load characteristics | |
| Voltage type | ≥10kΩ |
| Current type | No display load≤{(US-7.5)÷0.02}Ω with display load≤{(US-12)÷0.02}Ω (US=supply voltage) |
| Environmental conditions | |
| Media temperature | -40～130℃ |
| Ambient temperature | -40～85℃ |
| Ambient humidity | 0%~95%RH(no condensation, no condensation) |
| Overload capacity | |
| Overload pressure | 200% full scale, 300% FS |
| Burst pressure | 600%FS,500%FS,400%FS |
| Overall material | |
| diaphragm | 316L stainless steel (contact with the medium to be measured) |
| Process connection | 316 stainless steel (contact with the medium to be measured) |
| enclosure | 316 stainless steel |
| Display the shell | ABS Engineering Plastics (LED Display) |
| Hirschmann joints | ABS engineering plastics |
| Mechanical stability | |
| Seismic performance | 10g(20… 2000Hz) conforms to IEC60068-2-6 standard |
| Impact resistance: | 500g/ms conforms to IEC60068-2-27 standard |
| Electrical protection | |
| Short-circuit protection | perpetual |
| Anti-polarity protection | No damage, but not working |
| Insulation resistance | ≥100MΩ500VDC |
| Dielectric strength: | 500VAC |
| Output limits | |
| The output is minimal | 4mA,0,0.001VDC,0.05VDC |
| Output maximum | 20mA,2000,10VDC,5VDC |