Star Sensor Manufacturing Co., Ltd
To be a Chinese sensor begins with the heart and experience
Add to Cart
CYYZ92Y pressure transmitter is carefully designed and has absolute, gauge and negative pressure types. Its compact structure is suitable for industrial equipment with limited installation space.
| Base parameters | |
| Measuring medium | Liquid or gas (compatible with contact material) |
| Pressure range | -0.1~0~6MPa (see selection table for details) |
| Pressure mode | Absolute, gauge, negative |
| Output signal | 4～20mA,0～5VDC |
| Power supply range | 9～32VDC |
| Media temperature | -40～85℃ |
| On-time | 20ms |
| Response frequency | Analog signal output≤ 20Hz |
| Accuracy class | 0.5%FS (including repeatability≤0.035%FS, hysteresis≤0.05%FS) Reference conditions: temperature 15~25°C, atmospheric pressure 86~106kPa, humidity 45~75%RH |
| Temperature compensation | -10～70℃ |
| Stable performance | ± 0.2% FS/year |
| Temperature drift | ±0.02%FS/°C (temperature compensated) |
| Degree of protection | IP67 Note: The above protection level refers to the electrical connection achieved after it is complete, and also depends on the electrical connection plug. |
| Durable performance | 10X10⁶ times (lower range to upper range cycles) |
| Overall weight | ≈60g |
| Maximum power | ≤0.02Us(W) Note: Us=Supply voltage |
| resolution | 0.02%FS |
| Load characteristics | |
| Voltage type | ≥10kΩ |
| Current type | Load ≤ {(Us-7.5)÷0.02}Ω(Us=Supply voltage) |
| Environmental conditions | |
| Ambient temperature | -40～85℃ |
| Ambient humidity | 0%~95%RH(no condensation, no condensation) |
| Overpressure and blasting | |
| Overload pressure | 200%FS,200%FS,200%FS,300kPa,480kPa,750kPa,800kPa,1.2MPa 2MPa,3MPa,5MPa |
| Burst pressure | 500%FS,500%FS,400%FS,600kPa,900kPa,1.25MPa,2MPa,3MPa,5MPa 9MPa,12.5MPa |
| Overall material | |
| diaphragm | 316L stainless steel (contact with the medium to be measured) |
| Process connection | 304 stainless steel (contact with the medium to be measured) |
| enclosure | 304 stainless steel |
| Threaded seals | Fluorine glue (contact with the medium to be measured) |
| Connector | ABS engineering plastics |
| Cable | φ3.2 polyurethane shielded cable |
| Mechanical stability | |
| Seismic performance | 20g(20… 2000Hz) in accordance with IEC60068-2-6 standard |
| Impact resistance | 500g/ms conforms to IEC60068-2-27 standard |
| Electrical protection | |
| Short-circuit protection | perpetual |
| Anti-polarity protection | No damage, but not working |
| Insulation resistance | ≥100MΩ 500VDC |
| Dielectric strength | 500VAC |
| Output limits | |
| 4-20mA | Output min. 4mA and output max 20mA |
| 0-5VDC | Output minimum 0.001VDC, output maximum 5VDC |